INGEX france - outils de coupe pour usinage de roues de chemins de fer


					Contacts

Accueil

Machines
outils

Outillages
machines

Equipements
d'ateliers

Disponibilitée d'outils de coupes pour divers usages.

Plaquettes et porteplaquettes pour la réfection des éléments d'usures des trains

Exemple d'usinage - pour la réparation de roue

▪ Insert : LNUX301940-TM
▪ Workpiece : SSW2㉿,
   Φ920~1000 mm
▪ Condition:
   V=78 m/min (S=13~18 rpm)
   f=1.0mm/rev
   d=3~4mm
▪ Result : Better chip evacuation, longer tool life and stable machining than competitor’s

Exemple d'usinage - pour roue de classe A

▪ Insert : RCMX3209M0-SL
▪ Workpiece : SSW2㉿,
   Φ840 mm
▪ Condition:
   V=55~100 m/min
   f=1.0~1.5mm/rev
   d=1~6mm
▪ Result : Better chip evacuation, longer tool life and stable machining than competitor’s

RCMX32 Inserts - Chip-Breakers

Designation	Geometry	Cross section View	Features	Cutting Conditions
RCMX3209M0-SL			- for Copying and corner R machining - Good chip evacuation and machinability - Recommended at the cutting condition	V=30~90m/min d=1~5mm f=0.1~1.3mm/rev
RDMX3209M0-TM			- Wide range coverage of roughing - Longer tool life - 1st. Choice	V=30~90m/min d=3~8mm f=0.15~1.5mm/rev
RCMX3209M0-SA			- Good chip flow and rigid cutting edge - for Low D.O.C - Use within the recommended cutting condition	V=30~90m/min d=0.5~3mm f=0.1~1.0mm/rev
RCMX3209M0-SB			- Good chip flow and rigid cutting edge in corner R cutting - for Low D.O.C. - Use within the recommended cutting condition	V=30~90m/min d=0.5~3mm f=0.1~1.0mm/rev
RCMX3209M0-B			- Wide range coverage of roughing - Long tool life and rigid edge	V=30~90m/min d=4~13mm f=0.2~2.0mm/rev

RCMX25, 20 Inserts - Chip-Breakers

Designation	Geometry	Cross section View	Features	Cutting Conditions
RCMX2507M0			- for General condition - Long tool life - Good wear resistance	V=40~120m/min d=0.5~3mm f=0.1~1.0mm/rev
RCMX2507M0-X			- for General condition - Long tool life - Good wear resistance	V=40~120m/min d=0.5~4mm f=0.1~1.2mm/rev
RCMX2006M0			- at Low D.O.C -> better chip evacuation - at Deep D.O.C -> longer tool life	V=50~150m/min d=0.5~3mm f=0.1~1.0mm/rev
RCMX2006M0-X56			- for Interrupted machining	V=50~150m/min d=0.5~3mm f=0.1~1.0mm/rev

RCMX16 Inserts - Chip-Breakers

Designation	Geometry	Cross section View	Features	Cutting Conditions
RCMX1606M0-TF			- for Finishing - Good machinability and surface roughness	V=60~180m/min d=0.5~2.5mm f=0.1~0.8mm/rev
RCMX1606M0-TM			- for Finish-medium - for Good surface roughness and wear resistance	V=30~90m/min d=0.5~2.5mm f=0.1~0.8mm/rev
RCMX1606M0			- for General cutting - for Good chip evacuation and long tool life in deep D.O.C	V=30~90m/min d=0.5~2.5mm f=0.1~1.0mm/rev
RCMX1606M0-S1			- for Medium cutting - Good machinability and rigid cutting edge	V=30~90m/min d=0.5~2.5mm f=0.1~1.0mm/rev
RCMX1606M0-X167			- Wide range coverage - Good tool life big D.O.C. change	V=30~90m/min d=0.5~2.5mm f=0.1~1.0mm/rev

Téléphone : +33 (0)9 61 29 44 91 - Mobile : +33 (0)6 80 82 53 32 - Fax: +33 (0)2 35 60 42 41 - Email :contact@ingex-france.com